Geo Cloth Drainage Fabric for Driveway Filtration System in Indonesia

 

Geo cloth drainage fabric, also known as geotextile drainage fabric, is the ideal geosynthetic material used to filter, separate, reinforce, protect, retain or drain soil for civil construction applications including roads, airfields, railroads, embankments, retaining structures, reservoirs, canals, dams, bank protection, coastal engineering and construction site silt fences or geotube. Usually Geo cloth drainage fabric is placed at the tension surface to strengthen the soil. Geotextile filter cloth is also used for sand dune armoring to protect upland coastal property from storm surge, wave action and flooding. A large sand-filled container (SFC) within the dune system prevents storm erosion from proceeding beyond the SFC. Using a sloped unit rather than a single tube eliminates damaging scour.

Erosion control manuals comment on the effectiveness of sloped, stepped shapes in mitigating shoreline erosion damage from storms. Geotextile sand-filled units provide a “soft” armoring solution for upland property protection. Geo cloth drainage fabric is used as matting to stabilize flow in stream channels and swales.

Geo cloth drainage fabric can improve soil strength at a lower cost than conventional soil nailing. In addition, geotextile cloth drainage fabric allows planting on steep slopes, further securing the slope. In building demolition, Geo cloth drainage fabrics in combination with steel wire fencing can contain explosive debris. Geo cloth drainage fabric is popular for erosion control, slope stabilization and bioengineering, due to the fabric’s substantial mechanical strength. Geotextile filter cloth last approximately 3 to 5 years depending on the fabric weight. The product degrades into humus, enriching the soil.

Our Indonesian customer sent us an inquiry email on our geotextile website. The email mentioned that 15,000 square 300g filament geotextile was needed, and said that this was only a trial order, if the goods were satisfied, he would continue to cooperate with us in the future. After we accepted the email, we gave the customer the geotextile price. During the communication, we sent the customer our test report and indicators, production videos and our application cases. The customer showed great interest in our products and felt that the price was appropriate. After two weeks of communication, the customer decided to give us this order. After the customer received the goods, they were full of praise for our goods. In the month after the addition, they purchased another 40-foot container of geotextile.

Specifications of Geo Cloth Drainage Fabric for Driveway Filtration System in Indonesia

• Total quantity – 50,000 squares meters
• Weight – 300gsm
• Each roll size  – 6m*50m

About BPM

BPM manufactures and supplies many types of effective and states of the art geotextile, geomembrane, and other geosynthetics to over 36 countries. BPM geosynthetic products are widely used across a variety of industries including waste containment, water containment, aquaculture, industrial project, energy project and mining projects, etc. BPM main customers are from Australia, France, Sweden, UK, Hungary, New Zealand, Poland, Mexico, Ecuador, Brazil, Pakistan, Bangladesh, Thailand, Vietnam, Malaysia, Indonesia, Singapore, Philippines, Sri Lanka, India, UAE, Saudi Arabia, Qatar, Kenya, etc.

BPM is not only manufacturing best quality geosynthetic products but also providing professional design and installation service. OEM, ODM, custom development and fabrication are also available. If you have any questions or inquiries,  please fill and submit the following form, we will reply as soon as possible.

Soil Filter Fabric for Road Construction Project in Myanmar

 

Soil filter fabric is the kind of ideal geotechnical material which used in the civil construction, especially in roads and fills to improve soil properties. The recent popularity of geotextile fabric makes a poor soil more manageable and making possible to build in places where otherwise would be impossible. It is the ideal materials for infrastructure works such as roads, harbors, and many others.

BPM Indonesia customer use our PET nonwoven soil filter fabric for road construction. We recommended the 300gsm nonwoven geotextile fabric, Its role is the following three points:

1. Filtration.When the water drains from the fine soil into the coarse soil layer, the polyester staple fiber needled punched geotextile fabric expresses good permeability and permeability, so that the water flow through, and effectively carry soil particles, fine sand, small stones, etc., in order to maintain the stability of water and soil engineering.
2. Drainage.Polyester staple fiber nonwoven geotextile has good water conductivity performance, it can form a drainage channel inside the soil body, the excess liquid and gas in the soil structure outside the row.
3. Protection.When the water flows across the soil, it will effectively spread the stress, transfer or decompose, and prevent the soil from being damaged by the external force. Second, the foundation treatment, the main role is to strengthen. The use of polyester staple fiber needle-punched geotextiles enhances the tensile strength and deformation resistance of the soil and enhances the stability of the building structure to improve the quality of the soil.,Specifications 400gsm.

Specifications of Soil Filter Fabric for Road Construction Project in Myanmar

• Total 300gsm geotextile quantity – 100,000 ㎡
• 400g geotextile – 20,000 ㎡
• Each roll size is 8*50m

About BPM

BPM manufactures and supplies many types of effective and states of the art geotextile, geomembrane, and other geosynthetics to over 36 countries. BPM geosynthetic products are widely used across a variety of industries including waste containment, water containment, aquaculture, industrial project, energy project and mining projects, etc. BPM main customers are from Australia, France, Sweden, UK, Hungary, New Zealand, Poland, Mexico, Ecuador, Brazil, Pakistan, Bangladesh, Thailand, Vietnam, Malaysia, Indonesia, Singapore, Philippines, Sri Lanka, India, UAE, Saudi Arabia, Qatar, Kenya, etc.

BPM is not only manufacturing best quality geosynthetic products but also providing professional design and installation service. OEM, ODM, custom development and fabrication are also available. If you have any questions or inquiries,  please fill and submit the following form, we will reply as soon as possible.

HDPE Fish Safe Pond Liner for Aquaculture Farm Construction in Indonesia

 

HDPE fish safe pond liner, also known fish pond liner, is the kind of HDPE geomembrane liner used as the anti seepage lining system to contain water for aquaculture farm.  As the demand for the vannamei shrimp market continues to increase, Indonesia’s commercial fish and shrimp ponds have begun to develop rapidly, making Indonesia a major producer of shrimp and fish in the world. Indonesia has a long and narrow coastline, many islands, and rich marine resources. Most aquaculture farm ponds in Indonesia are close to the coast. Aquaculture farm ponds need industrialized supply of shrimp feed, fertilization of the ponds to promote microbial growth, oxygenation and regular water changes. It is also necessary to prevent the accumulation of waste in the soil, and to prevent harmful chemicals such as ammonia, hydrogen sulfide, acidic substances, iron and other potentially harmful compounds from entering the pond. Because of this, HDPE geomembrane liner, especially HDPE fish safe pond liner,  has been widely used in the construction of shrimp or fish ponds and has played a key role in the construction of shrimp or fish ponds due to its good environmental stress cracking resistance, tensile puncture resistance, UV resistance and excellent anti-seepage performance. Function Therefore, choosing a reliable fish safe pond liner product has become the key to the construction of shrimp ponds. There are many brands of HDPE geomembrane in the market, but the quality is also uneven. BPM brand HDPE fish safe pond liner is your good choice for its high quality, competitive price and fast delivery time.

In terms of product raw materials, the HDPE geomembrane produced by BPM uses a brand new resin imported from Saudi Arabia, and many poor-quality soil membranes generally use polyethylene general-purpose resin, and a large number of recycled plastics are used for crushing and doping production, which greatly reduces the product. Quality, buried hidden dangers for the anti-seepage project. In terms of production equipment, the soil membrane produced by BPM adopts full computer control and the world’s most advanced automatic production equipment. The product quality is very stable. Most of the fish safe pond liner produced by ordinary companies use production plastics. The equipment modification of the film bag has low investment cost, and the product quality is extremely unstable. The HDPE geomembrane fish safe pond liner produced by BPM is 100% in line with the international GRI-GM13 standard. In terms of quality control, the geomembrane produced by BPM has passed the GAI- of the IGS International Geosynthetics Association. LAP laboratory certification, testing and tracking each roll of geomembrane pond liner. Strict quality control makes BPM very competitive in the Indonesian market and is welcomed by Indonesian shrimp farmers.

Parameters of HDPE Fish Safe Pond Liner for Aquaculture Farm Construction in Indonesia

• Thickness: 0.3mm-0.75mm
• Width: 4m-8m
• Length of each roll: 50m-420m

About BPM

As the the professional geomembrane manufacturer and supplier, BPM has been dedicated to supplying one stop geomembranes and services to worldwide customers since its foundation in 2010. Our main innovative, high quality geosynthetics products include geomembranes, geotextiles, geocells, geosynthetic clay liners (GCLs), drainage boards, geogrids, etc. All BPM brand HDPE geomembranes have passed the  certificates of the ISO9001, ISO14001, TUV, Soncap, SASO, BV certificates and the test of SGS and Intertek etc.  Our geomembrane products have been exported to over 36 countries. If you have any questions or inquiries, please fill in and submit the form to contact us.

Non Woven Geotextile Blanket for Soil Stabilization Project in Thailand

 

Non woven geotextile blanket is constructed of 100% polypropylene staple fibers, which are formed into a random network for dimensional stability. Non woven Geotextile blanket mainly includes filament non woven geotextile and short fiber needle punched geotextile fabric. BPM non woven geotexgtilefabric resists ultraviolet deterioration, rotting, biological degradation and resists naturally encountered bases and acids. Polypropylene is stable within a PH range of 2 to 13. Designed and manufactured primarily for construction applications, these non woven geotextile blankets are used in a variety of civil and environmental applications to separate aggregates, filter materials and provide a reliable foundation under specific areas. Engineered to offer high levels of permeability, the non woven geotextile blanket an ideal solution for separation, drainage, sediment control, cushioning and various other construction and road repair applications. These non woven geotextiles have a random, three dimensional pore structure and are therefore highly water permeable.

BPM Thailand costumer found us from Facebook, he told us that he wanted non woven geotextile blanket for soil stabilization. And he informed us of their local soil conditions. After some communication, we recommended300g hot-rolled filament non-woven geotextiles to customers, because this specification geotextile fabric is not only cheap but also has very good indicators and relatively high cost-effective.The customer replied that he needed samples  to discuss with their team. We mailed different weights, hot-rolled and non-hot-rolled nonwoven geotextiles to the customer for comparison. After the customer received the samples, we chose the recommended specifications of 300gsm heat-treated non woven geotextile blanket. After a period of communication, the customer has a great newcomer to us, and decided to buy 60,000 square meters of 300gsm heat-treated non-woven geotextile from us.

Specifications of Non Woven Geotextile Blanket for Soil Stabilization Project in Thailand

• Geotextile weight– 300gsm
• Total Quantity – 6,000square meters
• Roll Size – 6m*70m

About BPM

BPM manufactures and supplies many types of effective and states of the art geotextile, geomembrane, and other geosynthetics to over 36 countries. BPM geosynthetic products are widely used across a variety of industries including waste containment, water containment, aquaculture, industrial project, energy project and mining projects, etc. BPM main customers are from Australia, France, Sweden, UK, Hungary, New Zealand, Poland, Mexico, Ecuador, Brazil, Pakistan, Bangladesh, Thailand, Vietnam, Malaysia, Indonesia, Singapore, Philippines, Sri Lanka, India, UAE, Saudi Arabia, Qatar, Kenya, etc.

BPM is not only manufacturing best quality geosynthetic products but also providing professional design and installation service. OEM, ODM, custom development and fabrication are also available. If you have any questions or inquiries,  please fill and submit the following form, we will reply as soon as possible.

PET Filament Geotextile Filter Cloth For Road Construction in Kuwait

 

PET filament geotextile filter cloth is a continuous filament geotextile made from highly durable virgin polyester fibers, which are resistant to all naturally occurring soil acids and alkalis, it is the most popular geotextile fabric in the world which is widely used for landfill, dam, oil tank and road etc. BPM filament geotextile filter cloth offers optimum performance per unit weight which features high tensile strength and puncture resistance, good acid and alkali resistance, excellent drainage and anti-aging properties, etc. Soil reinforcement with filament geotextile can reduce the need to replace the rock surface of your driveway every few years. It also offers benefits for your asphalt or concrete driveway by reducing cracking and prolonging life.The best geotextile fabric mainly including woven geotextile or non woven geotextile, which has many functions such as reinforcement in retaining wall backfill, strengthen the weak road and fix the cracks on the road , reinforce the weak foundation of engineering of road, railway embankment, airport and so on.

BPM Non Woven PET Filament geotextile Features

1.High strength, due to the use of plastic fiber, in the wet and dry state can maintain sufficient strength and elongation.

2.Corrosion resistance, in different PH of soil and water can be long corrosion resistance.

3.Good anti-microbial resistance to microorganisms, moth are not damaged.

4.Construction is convenient, because the material is light and soft, so transport, laying, construction is convenient.

BPM customer from Kuwait contacted us through our website, he is a dealer in Kuwait. There are many projects like road use many geotextile, so he asked us which type geotextile is better. We recommend him the PET Filament geotextile filter cloth  and showed him the technical data to compare with other geotextile data. And we also sent him some video and pictures about our production and project installation. After that, he chose the PET Filament continuous geotextile and want to try sell 100gsm, 150gsm, 300gsm, 350gsm products.

Specifications of PET Filament Geotextile Filter Cloth For Road Construction in Kuwait

• Total quantity – 78,510square meters
• Geotextile weight – 100g/110g/300g/350g
• Each roll size – 95m*100m or 3m*100m

About BPM

BPM manufactures and supplies many types of effective and states of the art geotextile, geomembrane, and other geosynthetics to over 36 countries. BPM geosynthetic products are widely used across a variety of industries including waste containment, water containment, aquaculture, industrial project, energy project and mining projects, etc. BPM main customers are from Australia, France, Sweden, UK, Hungary, New Zealand, Poland, Mexico, Ecuador, Brazil, Pakistan, Bangladesh, Thailand, Vietnam, Malaysia, Indonesia, Singapore, Philippines, Sri Lanka, India, UAE, Saudi Arabia, Qatar, Kenya, etc.

BPM is not only manufacturing best quality geosynthetic products but also providing professional design and installation service. OEM, ODM, custom development and fabrication are also available. If you have any questions or inquiries,  please fill and submit the following form, we will reply as soon as possible.

LLDPE Liner for Ecology Pond Project in Indonesia

 

LLDPE liner is a special waterproofing geomembrane liner among plastic products. The LLDPE liner is made from high grade polyethylene raw material, adding carbon black, antioxidan, anti-aging and UV resistance component. It adopted the first class automatic production equipment and three layer pressing technology. It can be produced different thickness from 0.1mm to 3.0mm and include smooth and textured surface. All products are in accordance with GB, GRI and ASTM standard.

Geomembrane LLDPE liner is the low permeable synthetic membrane liner and geotechnical engineering material which is widely used for the impermeable lining system of waterproofing pond, such as landfill, dam, cancel, fish pond, ecology pond etc. The ecology pond liner with 100% virgin polyethylene material has stable low temperature embrittlement resistance, proven performance, lowest permeability and excellent UV resistance, it can be helpful for antiseepage lining pond project.

BPM customer has a big project of ecology pond in Indonesia and found us on Alibaba. He required the long service life of geomembrane liner in his project pond. As the professional geomembrane manufacturer, we recommended him to use the maximum thickness 3.0mm geomembrane liner, and the service life can be used for more than 20 years. And then the customers wanted to check the sample. We produced 12 square meters sample LLDPE liner and send to him for test. And we also provide him BPM all certificates and production video, project case for reference. After the geomembrane liner was tested, they sent us their pond draft and asked to installation method. We provided the installation guide and video to our customers, and also recommended the welding machine to join the geomembrane liner.

Specifications of LLDPE Liner for Ecology Pond Project in Indonesia

• Total LLDPE pond liner quantity – 16,750 square meters
• Pond Liner thickness – 0.5 mm
• Each roll size is 6m*30m

About BPM

As the the professional geomembrane manufacturer and supplier, BPM has been dedicated to supplying one stop geomembranes and services to worldwide customers since its foundation in 2010. Our main innovative, high quality geosynthetics products include geomembranes, geotextiles, geocells, geosynthetic clay liners (GCLs), drainage boards, geogrids, etc. All BPM brand HDPE geomembranes have passed the  certificates of the ISO9001, ISO14001, TUV, Soncap, SASO, BV certificates and the test of SGS and Intertek etc.  Our geomembrane products have been exported to over 36 countries. If you have any questions or inquiries, please fill in and submit the form to contact us.

Preformed Tank Lining System for Outdoor Fish Tank in Indonesia

 

Preformed tank lining system, also known as HDPE tank liner, uses high-quality polyethylene virgin resin as raw material, and adds carbon black, anti-aging agent, anti-ultraviolet absorber, stabilizer and other auxiliary materials. In addition, BPM Geosynthetics uses the world’s advanced automated geomembrane production equipment. It is produced by three-layer co-extrusion blow molding process or calendering process technology. The preformed tank lining system is an effective waterproof and barrier type engineering material. We can divide the surface into smooth geomembrane tank liner, Textured geomembrane tank liner and composite geomembrane tank liner; According to the color, it can be divided into black, white, green and blue geomembrane tank liner. BPM Preformed tank lining system has been tested by SGS laboratory, soncap, SASO, BV and intertek.

Indonesian customers sent us an inquiry about preformed tank lining system through the company website. We learned on WhatsApp that the customer needed about 30 round tanks for aquaculture. Each tank is about 9 meters in diameter and 1.5 meters in height. By calculation, about 110,000 square meters of geomembrane tank liner was needed. Because in the international market, such as Sri Lanka, Singapore, Nigeria, Ecuador and Indonesia, tanks are very popular aquaculture methods. After our long-term understanding of the tank project, we recommended 1.0mm or 1.2mm geomembrane to customers. After the customer received the samples, they recognized the quality of the Preformed tank lining system. After confirming some details such as quotation, the customer confirmed the order of 10,000 square meters of 1.0mm geomembrane tank liner to our BPM company.

Specifications of Preformed Tank Lining System for Fish Project in Indonesia

• Preformed Ponds Tank Liner thickness – 1.0 mm
• Total Quantity – 10,000 Square meters
• Roll Size – 7m*100m

About BPM

As the the professional geomembrane manufacturer and supplier, BPM has been dedicated to supplying one stop geomembranes and services to worldwide customers since its foundation in 2010. Our main innovative, high quality geosynthetics products include geomembranes, geotextiles, geocells, geosynthetic clay liners (GCLs), drainage boards, geogrids, etc. All BPM brand HDPE geomembranes have passed the  certificates of the ISO9001, ISO14001, TUV, Soncap, SASO, BV certificates and the test of SGS and Intertek etc.  Our geomembrane products have been exported to over 36 countries. If you have any questions or inquiries, please fill in and submit the form to contact us.