Driveway Stabilization Fabric for Road Reinforcement Project in Malaysia

 

Driveway Stabilization Fabric for Road Reinforcement Project in Malaysia

Geotextile driveway stabilization fabric is a synthetic high-strength fiber material used to improve the bearing capacity of the roadbeds when the bearing capacity of the foundation is poor. Geotextile is a new type of building material, which has various functions such as anti-seepage, filtration, drainage, isolation, reinforcement, and protection, etc.The driveway stabilization fabric has a wide variety of different uses. The purpose is to improve the bearing capacity and prevent cracks on the road surface.  Compared with the anti-seepage coefficient of conventional stone masonry and concrete materials, it has low investment and construction. The process is simple, the construction period is short, the seepage prevention effect is good, and the channel effective utilization coefficient is high. In the process of road construction, the high friction coefficient of geotextile driveway stabilization fabric is used to increase the resistance between the soil and the geotextile to limit the displacement of the roadbed. And it can disperse the local stress and enhance the stability and integrity of the roadbed. The above is the effect of reinforcement.

BPM Malaysia client got a road construction project and wanted to purchase needle punched geotextile for roadbed reinforcement. We suggested our client using 250gsm PET needle punched geotextile fabric for driveway reinforcement. PET needle punched geotextile includes PET short fible geotextile and PET filament geotextile. And we quoted our client for both material based on one 40HQ container separately. By considering price, load ability and project requirement, BPM client chose PET filament geotextile driveway stabilization fabric finally. During this time, we sent samples and test report from the third party to our client by Express. After confirming our samples, our client placed the order 40000 square meters for the first batch immediately due to the urgent order. Thanks for our clients’ trust and support.

So how can the unearthed driveway stabilization fabric be used to reinforce the road construction?

1. When laying, try to lay as flat as possible without wrinkles, and leave excess parts at the edge of the laying;
2. When stitching or welding the geotextile fabric, the width should be kept above 10 cm, and if it is overlapped, the width should be kept above 20cm;
3. The role of geotextile driveway stabilization fabricreinforcement, the step of stitching is very important, whether it is thread selection or technical problems, it must follow relative procedures and follow relative standards;
4. During road construction, the geotextilefabricis generally laid in two layers, that is, one layer is laid on the top and bottom of the geomembrane. The geotextile of the lower layer of the geomembrane is generally overlapped, and the geotextile above is generally used. Is stitching or hot air welding;
5. The thickness of the geotextile must be uniform, so that when the asphalt is poured, the geotextile can evenly absorb the asphalt and form a uniform isolation layer;
6. In order to enhance the aging resistance of the geotextile and prolong the service life of the geotextile, the geotextile should be laid as deep as possible.

All in all, if you want to play the full reinforcement role of the excavated geotextile in road construction, many aspects must be considered. In addition to the above construction requirements, the quality of the geotextile fabric before construction, the maintenance of the road after the construction, etc. The details determine success or failure.

Specifications of Driveway Stabilization Fabric for Road Reinforcement Project in Malaysia

• Total geotextile quantity – 40,000 square meters
• PET needle punched geotextile specification – 250gsm
• 5.85m*100m/roll