Reinforced Polyethylene Liner for Landfill Project in Indonesia

Reinforced polyethylene liner, also called HDPE geomembrane, for landfill is made from about 97% high density polyethylene and about 3% carbon black，adding antioxidant, anti-aging, UV-resistance, and heat stabilizer.  The which is divided into smooth geomembrane and rough geomembrane. HDPE geomembrane liner is divided into smooth geomembrane HDPE linerand textured geomembrane liner.  And textured geomembrane liner is divided into single side textured geomembrane and double sided geomembrane. BPM brand reinforced polyethylene liner for landfill is in accordance with GB, GRI and ASTM test standard. The two kinds of standard geomembranes, because the required indicators are different, the added raw materials are also different, and the mechanical indexes are also very different. The reinforced polyethylene liner for landfills has higher tensile strength, higher elongation, stronger acid resistance and longer life span than ordinary plastic geomembrane. The reinforced polyethylene liner for landfills is more inclined to use a textured geomembrane with anti-slip effect. Our reinforced polyethylene liner is widely used in water conservancy, landscaping, petrochemical industry, mining, salt industry, agriculture and aquaculture, etc.

Reinforced polyethylene liner has the following advantages

• Complete variety of specifications of width and thickness. Thickness is 0.2-2.0mm. 
• Excellent environmental stress resistant and cracking performance.
• Excellent performance of chemical erosion resistance.
• Big scope of application temperature and long service life.
• Low permeability. Reinforced polyethylene for landfill is secure because leachate does not penetrate them and Methane gas will not escape from HDPE gem-membrane cover system.
• Chemical Resistance. Reinforced polyethylene for landfill is resistant to a wide range of chemicals.
• It is also suitable for sludge and secondary containment around chemical storage facilities. 
• Ultraviolet Resistance. Reinforced polyethylene has good resistance to UV exposure is further enhanced by the addition of carbon black. Additionally, with the absence of plasticizers, volatilization is not a problem.

When the reinforced polyethylene liner is used for landfill, because the landfill site contains a large amount of garbage, we need to classify and land the garbage. When the garbage is landfilled, it can be accelerated its degradation rate so that the soil can help us digest the garbage quickly. The soil contains a large number of microorganisms and insects, these microbial bacteria can effectively decompose various kinds of garbage. The air around the landfill is often stinky, in order to prevent a large amount of garbage from rising in the windy weather. Therefore, people use reinforced polyethylene liner to prevent seepage and covering. When a large amount of garbage surface is covered with this material, the ultraviolet light can accelerate the decomposition speed of the garbage because of the reinforced polyethylene liner. It can effectively fight ultraviolet rays, so long-term exposure to ultraviolet light does not affect this material. Therefore, in order to effectively accelerate the decomposition rate of garbage, and at the same time, in order to prevent a large amount of garbage from rising with the wind and polluting the environment, people will use a reinforced polyethylene liner to cover the landfill. People use this material. It can effectively prevent a large amount of garbage from rising with the wind, pollute the environment, pollute the air, and at the same time effectively accelerate the decomposition rate of the garbage, so the person in charge of the landfill will purchase this reinforced polyethylene liner, because this reinforced polyethylene liner plays an important role in the decomposition of garbage and environmental protection.

Our Indonesia customer sent us a inquiry. After deeply communicating with him, we suggested 2.0mm virgin material reinforced polyethylene liner and offered very competitive price based on 12,000 square meters. Moreover, we provide customer more details of reinforced polyethylene liner for landfill project cases for reference. Then he asked for us to send samples of 2.0mm HDPE geomembrane to them. After reinforced polyethylene liner samples passed testing, our Indonesia customer decided to place the order to us.

Specifications of Reinforced Polyethylene liner for Landfill Project in Indonesia

• Total HDPE geomembrane quantity – 12000 m²
• HDPE Geomembrane thickness – 2.0mm
• Each roll size 7m*100m

About BPM 

BPM is the professional geosynthetics manufacturer and exporter. Our main innovative, high quality geosynthetic products include geomembranes, geotextiles, geocells, geosynthetic clay liners (GCLs), drainage boards, geogrids, etc. BPM brand geosynthetic product had been certificated by the ISO9001, ISO14001,OHSAS18001 Soncap, SASO and BV certificates and passed the test of SGS and Intertek, etc. Our geosynthetic products have exported to over 36 countries.

BPM is also providing professional geomembrane design and installation service. OEM and ODM are also available. If you have any questions or inquiries,  please fill and submit the following form, we will reply as soon as possible.

Filament Nonwoven Film Geotextile for Embankment Project in Myanmar

Filament Nonwoven Film Geotextile for Embankment Project in Myanmar

BPM filament nonwoven film geotextile is produced from polyester long fiber forming into net and consolidation with three dimension structure. Our nonwoven film Geotextile is a kind of new geotechnical material in geotechnical and engineering project. Except for its good mechanical properties of tensile strength and puncture resistance, the filament nonwoven film geotextile also has good drainage ability, acid and alkali resistance and anti-aging. The wider opening size allows the non woven geotextile has good permeability and filtration.

Filament film geotextile has good mechanical function, good permeability, and can resist corrosion, anti-aging, with isolation, anti-filtration, drainage, protection, stability, reinforcement and other functions, it can adapted to the uneven base, can resist the construction of external damage, creep, long-term load can still maintain the original function.

The Myanmar customer contacted us through the introduction of geotextile on the company’s website. He sent us detailed technical specifications, and asked us to send samples for testing. The salesman prepared the 200g, 250g and 300g of film geotextile samples according to the customer’s requirements by the fastest international express.

After testing, the customer was very satisfied with the tension and bursting strength. Finally, he ordered 200g/m² and 300g/m², 6 *40HQ containers in that month and informed him that there would be another 8 containers for consolidation two months later.

Specifications of Filament Nonwoven Film Geotextile for Embankment Project in Myanmar

• Total filament geotextile quantity – 256500m²
• 6* 40HQ containers
• Filament Geotextile specification –200g/m², 300 g/m²
• Each roll size is 6m*50m

About BPM

BPM had provided many types of effective and states of the art geotextile, geomembranes, and other geosynthetics to over 36 countries. Our geosynthetic products are widely used across a variety of industries including waste containment, water containment, aquaculture, industrial project, energy project and mining projects, etc. Our main customers are from Australia, France, Sweden, UK, Hungary, New Zealand, Poland, Mexico, Ecuador, Brazil, Pakistan, Bangladesh, Thailand, Vietnam, Malaysia, Indonesia, Singapore, Philippines, Sri Lanka, India, UAE, Saudi Arabia, Qatar, Kenya, etc.

BPM is also providing professional design and installation service. OEM and ODM are also available. If you have any questions or inquiries,  please fill and submit the following form, we will reply as soon as possible.

HDPE Landfill Liner Systems for Solid Waste Containment in Bangladesh

Landfill liner systems are the ideal geotechnical products applied for landfilling solid waste, rubbish garbage among mountains, excavated mines, etc. Landfill liner systems are generally composed of HDPE geomembrane liner and woven geotextile or other geosynthetic products. Due to their excellent corrosion resistance and acid and alkali resistance, HDPE Geomembrane liner and non-woven geotextile can resist more than 80 kinds of highly corrosive chemicals, and have strong tensile properties, UV resistance, anti-aging capabilities, etc.  Geotextiles and HDPE Geomembrane liner are widely used geotechnical materials in waste dumps and landfills.

With the fast economic development, urban modernization and vigorously promoting the industrialization process, it has brought huge economic benefits, and at the same time caused a large amount of industrial liquids and hazardous wastes in the industry, causing serious damage to the surrounding soil and ecological environment. Residual industrial liquids and hazardous wastes are extremely corrosive and need to be properly treated. Most countries are paying more and more attention to the ecological environment, and the national environmental awareness is gradually improving. Some domestic waste landfills and industrial factories produce residual hazardous waste landfill treatment projects in people’s field of vision, landfill liner systems, non woven geotextile and other geosynthetic materials are widely used in landfill treatment. These geosynthetic materials are made of non-toxic and environmentally-friendly raw materials.

The traditional reinforced concrete lining anti-seepage layer is complicated in construction, labor-intensive, time-consuming, and the construction cost is very high. Geotechnical materials have the advantages of low cost, convenient transportation, short construction period and simple construction. According to the statistics of the authoritative geotechnical materials association, it can save 50% of the cost and play an irreplaceable role. The landfill liner systems is the most important part of the whole project, and the non-woven geotextile plays a very important role as the protective layer and the permeable filter layer of the anti-seepage liner. In the single-layer anti-seepage layer, two layers of non-woven fabric are generally used as a protective layer to sandwich the HDPE geomembrane liner. The cloth protects the lower layer of water and the large particles adhere to the cloth to form a filter layer, allowing only fine soil particles. And water filtration, to prevent the loss of the lower layer of soil to maintain the stability of the soil layer, to avoid the occurrence of uneven settlement, thereby protecting the safety of the entire project of the landfill, while the geotextile prevents the upper layer of pollutant leachate and the underlying soil. Direct contact has played a role in isolation.

The landfill liner systems are powerful and efficient system to contain tons of solid waste garbage. Therefore, the HDPE geomembrane liner is 1.5mm and the width should be greater than 6 meters to reduce the welded joint. As practice has shown that 70% of the leakage from landfills occurs in welded joints. The selection of geomembrane is very important for environmental protection. The geotextile liner is 600g filament geotextile to protect HDPE geomembrane from damage, HDPE geomembrane in the buried area is acts as a special impermeable liner.

Specifications of HDPE Landfill Liner Systems for Waste Containment In Bangladesh

• Total geomembrane quantity – 27000m²
• Each roll size – 7m×100m
• geomembrane Thickness –1.5mm
• geotextile  Specification–600g/m²

About BPM 

BPM is the professional geosynthetics manufacturer and exporter. Our main innovative, high quality geosynthetic products include geomembranes, geotextiles, geocells, geosynthetic clay liners (GCLs), drainage boards, geogrids, etc. BPM brand geosynthetic product had been certificated by the ISO9001, ISO14001,OHSAS18001 Soncap, SASO and BV certificates and passed the test of SGS and Intertek, etc. Our geosynthetic products have exported to over 36 countries.

BPM is also providing professional geomembrane design and installation service. OEM and ODM are also available. If you have any questions or inquiries,  please fill and submit the following form, we will reply as soon as possible.

HDPE Pond Liner India for Fish Farm

HDPE Pond Liner India for Fish Farm

HDPE Pond Liner India, also called HDPE geomembrane or aquaculture pond liner, is the ideal geosnthetic product used in India to  control water quality which can affect the fish or shrimp health. HDPE pond liner is a kind of main anti-seepage material which is made of high-density polyethylene material and is made of (medium) high-density polyethylene resin as a waterproof barrier material. BPM Geomembrane is generally divided into smooth geomembrane HDPE liner, textured geomembrane liner, composite geomembrane liner, etc.

BPM Pond liner India has high physical and mechanical properties such as tensile strength, tear resistance and bursting. The product has high strength, good elongation performance, large deformation modulus, acid and alkali resistance, corrosion resistance, aging resistance and good anti-seepage performance. Within a certain range, properties may be varied to suit desired specifications for specific pond liners. The desired properties are usually determined after careful consideration of prevailing conditions under which the HDPE pond liner will be installed and operated.

HDPE Pond liner India adopts new technology to improve the anti-seepage effect, but the production process is more scientific and quicker, so the product cost is lower than the traditional waterproof material. The actual project using HDPE anti-seepage film has to save about 50% of the cost.

As water resources become scarcer, large-scale fish ponds are constructed of cement, which are too expensive and unstable, and are prone to water leakage. Traditional pond culture methods are no longer suitable for farmers. HDPE liner india has become a fish and shrimp culture. Primary choice. India has a huge market demand for cultured geomembranes. HDPE Pond liner India generally has a thickness of 0.35 mm or more, and most of them are 0.5 mm, 0.7 mm, 0.75 mm, 0.8 mm, and 1.0 mm.  Farmers in India like selecting HDPE pond liner for aquaculture and agriculture applications.

Our customer from India found the sales staff of our company through the introduction of other customers, he sent the size and detailed information of six fish ponds and asked for the HPDE pond liner India. He also required a comprehensive inspection. Based on years of experience, we recommend 0.75mm thick HDPE pond liner   to our customers. And according to the size of the customer’s fish pond, we calculated the number of use.

After that, we investigated the market situation of the customer and made analysis and comparison. Finally we promised competitive factory price in line with the customer’s requirements. The customer was very satisfied after receiving the price, but there were still questions about our quality. We sent the pond liner India sample to the customer, and we conducted comprehensive production follow-up work such as video shooting and thickness measurement in the production process according to the customer’s requirements. The customer finally chose to trust us and signed the contract.

Specifications of HDPE Pond Liner India for Fish Farm

• Total quantity – 45000m²
• Each roll size – 7m×100m
• Rolls-64rolls
• Thickness – 0.75mm

About BPM 

BPM is the professional geosynthetics manufacturer and exporter. Our main innovative, high quality geosynthetic products include geomembranes, geotextiles, geocells, geosynthetic clay liners (GCLs), drainage boards, geogrids, etc. BPM brand geosynthetic product had been certificated by the ISO9001, ISO14001,OHSAS18001 Soncap, SASO and BV certificates and passed the test of SGS and Intertek, etc. Our geosynthetic products have exported to over 36 countries.

BPM is also providing professional geomembrane design and installation service. OEM and ODM are also available. If you have any questions or inquiries,  please fill and submit the following form, we will reply as soon as possible.

HDPE Geomembrana for Mining Project in Tanzania

HDPE geomembrana, also called HDPE geomembrane liner, is made from high density polyethylene raw materials, adding carbon black and antioxidant, anti-aging, UV-resistance components. BPM HDPE geomembrana liner is not only suitable for fish or shrimp farming pond in aquaculture but also can be used for mining projects. Our high quality HDPE Geomembrana sheet features 100% virgin material, smooth surface and high tensile strength, higher break elongation, excellent performance in cooling water pond and its service life can reach more than 20 years.

Our Tanzania customer ordered HDPE geomembrane sheet to his mining project. They started the mining project in Octomber, 2018. We recommended that the 1.5mm HDPE geomembrane might be cost-effective for the project, meanwhile, we sent him the high density polypropylene geomembrane samples. After communication and negotiation, finally, he confirmed the quality of our HDPE geomembrana products, then he signed order and paid for the deposit. All the ordered geomembrana was delivered within 20 days.

Specifications of HDPE Geomembrana for Mining Project

• HDPE Geomembrane Thickness – 1.5mm
•  Specification – 7m×140m
• Total quantity – 218400 m²
• Delivery time – 20 days

About BPM

BPM specializes in manufacturing and exporting  one stop geosynthetics products and solutions to worldwide customers since its foundation in 2007.  BPM has provided many types of effective and state of the art  geomembrane, geotextile, geocell, geosynthetic clay liners (GCLs), drainage board, geogrid to over 36 countries. 

BPM is not only manufacturing best quality geosynthetic products but also providing professional design and installation service. OEM, and ODM are also available. If you have any questions or inquiries,  please fill and submit the following form, we will reply as soon as possible.

HDPE Pit Liner for Oil Production Application in Myanmar

HDPE Pit Liner is the kind of geomembrane HDPE liner which is proven excellent durability and high performance in both anti-seepage containment and mining covered applications. BPM HDPE pit liner is made with high grade High Density Polyethylene (HDPE) raw materials, adding carbon black, antioxidant, anti-aging and UV-resistance component which features excellent chemical resistance, outstanding stress crack capacity, lowest permeability and excellent UV resistance. BPM brand HDPE pit liner available in white, green or black. Our enhanced textured HDPE geomembrane with one or both surfaces textured is suitable for increased  frictional resistance on slopes. All our HDPE geomembrane liner is the ideal geosynthetic products for containment applications which require resistance to harsh chemicals, UV exposure, and hazardous waste in the complex oil and natural gas production industries in the world.

Oil and natural gas production is the most complex and challengeable industries. HPDE pit liner is widely used to store large gallons of fresh water, production water and drilling oil slurry.  When in oil and natural gas production, oil pits, reserve pits, and drilling sumps are typically used to store oil fluids and mud produced by the drilling process. These fluids can be highly contaminated with salts or chemicals and impermeable geomembrane HDPE liner barrier is often the best geotechnical material for lining application. BPM is one of the leading geomembrane companies in China with more than 10 years of experience in oil and gas pit liner engineering services. Our HDPE pit liner has good chemical and UV resistance, as well as excellent resistance to bridging, tearing and puncture resistance. For oil pit containment, we usually recommend a thickness of 1.0 mm HDPE geomembrane liner. 

Our customer Myanmar Oil and Gas corporation is Myanmar state owned enterprise. They wanted to build a 30,000 square meters oil pit for store fluids and mud produced by the drilling process. BPM high quality geomembrane pit liner products and professional installation service won the trust of Myanmar government. The bottom and the wall of the oil and gas pit are composed of geotextile and geotechnical impermeable geomembrane pit liner. Geothermal environment temperature, basic conditions, welding sequence, and materials and finished products have strict requirements for vacuum leak detection during construction. Through the process control, supervision and management during the construction process, the construction quality and construction period of the anti-seepage membrane of the entire pit pond are guaranteed.

Key Features of HDPE Pit Liner for Oil Production Application in Myanmar 

• Designed to prevent evaporation.

• Resistant to chemicals, frac fluids, and brine.

• Wide range of operating temperatures and PH levels.

• Economical, durable and lightweight.

• Prefabricated into large panels and ready for deployment.

Specifications of HDPE Pit Liner for Oil Production Application in Myanmar 

• Total Pond Liner quantity – 30000m²• Each roll size – 7m×100m
• Pond Liner Thickness –1.0mm

About BPM 

BPM is the professional geosynthetics manufacturer and exporter. Our main innovative, high quality geosynthetic products include geomembranes, geotextiles, geocells, geosynthetic clay liners (GCLs), drainage boards, geogrids, etc. BPM brand geosynthetic product had been certificated by the ISO9001, ISO14001,OHSAS18001 Soncap, SASO and BV certificates and passed the test of SGS and Intertek, etc. Our geosynthetic products have exported to over 36 countries.

BPM is also providing professional geomembrane design and installation service. OEM and ODM are also available. If you have any questions or inquiries,  please fill and submit the following form, we will reply as soon as possible.